Ortur Laser Master 2 Pro
De Ortur Laser Master 2 Pro (OLM2P) is een desktop diode laser met een sterkte van 20w (5w effectief), en is geschikt voor het graveren van hout, kunststof, gecoate metalen, tegels en glas. De OLM2P wordt aangestuurd vanaf een PC (desktop of PC) via de USB interface middels GBRL of lightburn software (niet meegeleverd). Voor het graveren of snijden van materialen kunnen eigen ontwerpen worden gebruikt, deze kunnen worden voorbereid als SVG bestand en via software op de materialen worden gegraveerd of uitgesneden.
Zie ook de optie zoals behuizing, afzuiging, luchtondersteuning (air assist) of de cylindrische module voor ronde materialen.
Let op! Materialen moeten mogelijk voorbewerkt worden alvorens deze gegraveerd kunnen worden, zoals bijvoorbeeld glas, tegels of metalen.
€ 399,00 (€ 399,00 incl.btw)
Klik voor Categorieën
| Specificaties | Laser Master 2 Pro | Laser Master 2 |
|---|---|---|
| Motherboard | OLM-MAXUP-V10 Motherboard, with 32Bits MCU |
OLM-MAX-V10 Motherboard, with 32Bits MCU |
| Firmware | OLF-V1.5 Firmware | V1.40 Series Firmware |
| Safety Precautions |
1. Active Position Protection
2. Exposure Duration Detection and Limitation
3. Laser Beam Safety Guard
4. Flame Detector
5. Emergency Stop Button
|
1. Active Position Protection
2. Exposure Duration Detection and Limitation
3. Laser Beam Safety Guard
|
| Add-ons |
1. Ortur Control Box (Offline Controller)
2. Adjustable Z-axis Lifting Device
3. YRR 2.0 Rotary Roller
4. Detachable Cover
|
1. YRR 2.0 Rotary Roller |
| Frame Materials | Aluminum + Powder Coated Steel | Aluminum + Arylic |
| Motors | NEMA 17 Stepper Motors | NEMA 17 Stepper Motors |
| Mechanical Precision | Y:12.5um，X:12.5um | Y:12.5um，X:12.5um |
| Pixel Accuracy | Adjustable (Default: 300 pixels per inch, about 0.81um Pixel Accuracy) |
Adjustable (Default: 300 pixels per inch, about 0.81um Pixel Accuracy) |
| Engraving Area |
400mm*400mm
|
400mm*430mm |
| Available Laser Modules |
LU2-4 24V/2A
(2nd Generation FAC , Luminous Power: 4,500-5,000mw)
|
LU1-2
(Electric Power: 7W, Luminous Power: 1,200-1,600mw)
LU1-3
(Electric Power: 15W, Luminous Power: 4,000-4,500mw)
LU1-4
(Electric Power: 20W, Luminous Power: 4,500-5,500mw)
LU2-4 12V/3A
(2nd Generation FAC , Luminous Power: 4,500-5,000mw)
|
| Wave Length | 445±5nm | 445±5nm |
| Focus | Fixed Focus | Fixed Focus |
| Default Focal Length | 50mm (from the heat sink to the object) |
50mm (from the heat sink to the object) |
| Control Mode | PWM | PWM |
| Power Rate | S0-S1,000 | S0-S1,000 |
| Engraving Speed | 0-10,000MM/Min | 0-3,000MM/Min |
| Baud Rate | 115200 – 921600 (Default: 115200) | 115200 – 921600 (Default: 115200) |
| Computer OS |
Win XP, Win 7, Win 8, Win 10 (LaserGRBL)
Mac and Linux (LightBurn)
|
Win XP, Win 7, Win 8, Win 10 (LaserGRBL)
Mac and Linux (LightBurn)
|
| Control Softwares | LaserGRBL (free), LightBurn (Paid Software) | LaserGRBL (free), LightBurn (Paid Software) |
| Input Format | JPG, JPEG, PNG, BMP, SVG, etc. | JPG, JPEG, PNG, BMP, SVG, etc. |
|
Available Materials of Engraving
|
Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc. | Wood Board, Paperboard, Black Acrylic, Leather, Food, Stainless Steel, Power Coated Metal, etc. |
|
Available Materials of Cutting
|
Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc. | Wood Board, Paperboard, Black Acrylic, Leather, Felt Cloth, Dark Color Plastic Sheet (Melt), etc. |
| Input Voltage | 110V-220V (Compatible) | 110V-220V (Compatible) |
| Power Adapter Output | 24V/2A | 12V/3A |
| Operating Temp. | -20℃-50℃ | -20℃-50℃ |